|
|
|
|
| Below are details of
some of the Meyer Sound Labs speaker
systems available from McCune. |
|
|
| The MSL-4 is
a self-powered, arrayable, high-Q
long-throw reinforcement loudspeaker.
It operates with a very flat frequency
response from 18 kHz down to an impressive
65 Hz. To get an even lower range,
the unit works well with mid-bass
loudspeakers and subwoofers. The MSL-4
is unique; it is the first high-power
high-performance, self-contained reinforcement
loudspeaker. By integrating the controllers,
amplifiers and speaker components
into one unit, sound designers are
no longer required to waste time fussing
with different amplifier gains, rack
wiring, loudspeaker protection or
other problems that can compromise
a system's performance. All that is
required is to hookup AC power and
run a good quality signal source into
it. |
|
|
| Self-powered |
|
| Long-throw |
| High-Q |
| Two-way active, corrected
x-over |
| Compact, powerful |
| Ultra-low distortion
|
|
|
| Dimensions |
21 1/4" wide |
| |
36"
tall |
| |
30" deep |
| Weight |
180lbs (82kg) |
| Max. SPL (Peak) |
140db |
| Freq. range |
65-18kHz |
| . |
|
|
|
| The Meyer Sound CQ-1
is a self-powered, phase corrected,
precise coverage reinforcement loudspeaker.
The unit is arrayable and flyable.
The frequency response of 40 Hz to
18 kHz is uniform over the entire
coverage area in both the horizontal
and vertical axes, and the unit produces
no side-lobes. The amplifier, controller,
power supply and cooling subsystems
are integrated into a lightweight
module, service-accessible at the
back of the enclosure. Self-contained
electronics eliminate the need for
amp racks. The CQ's are compact for
efficient transport and setup. |
|
|
| High power |
|
| Extremely low distortion |
| Reliable and durable |
| Two-way coverage configurations |
| Integral amps and controllers |
| Intelligent AC |
|
|
| Coverage |
80°H 40°V |
| Dimensions |
21" w |
| |
30" h |
| |
22 1/2" d |
| Weight |
130lbs |
| Max. SPL |
136db |
| Freq. range |
40-18kHz |
| |
|
| . |
|
|
| The 650-P is
a self-powered, tuned, bass-reflex
subwoofer that uses two 18" drivers,
capable of long excursion with minimal
distortion. The unit extends the lower
range of sound reinforcement systems
by providing a frequency response
of 30 to 120 Hz. Being self-powered,
the amplifiers and control electronics
are fully contained within the speaker
enclosure. |
|
|
| High power |
 |
| Extremely low distortion |
| Reliable and durable |
| Integral amps and controllers |
| Intelligent AC |
|
|
| Coverage |
40°H 35°V |
| Dimensions |
30" w |
| |
45" h |
| |
22 1/2" d |
| Weight |
201lbs |
| Max. SPL |
136db |
| Freq. range |
30-120Hz |
| . |
|
|
The UPM-1P is a compact,
self-powered professional sound reinforcement
loudspeaker system. Versatile and
powerful, its bi-amped, three-way
design incorporates dual 5-inch low/mid
transducers, a 1-inch titanium dome
HF driver on a symmetrical 100°
horn, a two-channel power amplifier,
and Meyer Sound's proprietary phase-corrected
active processing circuits.
The UPM-1P is ideally suited to applications
requiring high sound pressure levels,
extremely low distortion, and uniform
directional control. Stand-alone,
the UPM-1P will provide vocal range
reinforcement as a small PA system,
in under-balcony, front- or side-fill
applications. A full-range system
can be created with the addition of
a separate optional subwoofer. |
|
|
| High Power |
|
| Extremely low distortion |
| Reliable and durable |
| Integral amps and controllers |
| Intelligent AC |
|
|
|
Coverage
|
100° H;100°
V
|
|
Dimensions
|
18.0" w
|
|
|
6.69" h
|
|
|
7.70" d
|
|
|
201lbs (91.3kg)
|
|
Freq. range
|
60Hz - 22kHz
|
|
Max. SPL
|
112 dB Cont.; 123
dB Peak
|
|
|
|
|
|
